PENJADWALAN PREVENTIVE MAINTENANCE PADA ARMADA TRUK DI CV. RAGIL JAYA ABADI
DOI:
https://doi.org/10.51804/jiso.v8i1.10-16Keywords:
Penjadwalan, Komponen, Preventive MaintenanceAbstract
ABSTRAK
Bagi perusahaan yang beroperasi di sektor distribusi dan logistik seperti CV. Ragil Jaya Abadi, keberadaan armada truk memegang peranan yang sangat krusial dalam menunjang aktivitas operasional sehari-hari. Armada truk yang handal dan dalam kondisi optimal menjadi kunci utama untuk menjamin kelancaran pengiriman barang serta menjaga kepuasan pelanggan. Namun, pendekatan yang digunakan bersifat korektif, di mana perbaikan hanya dilakukan setelah kerusakan terjadi. Akibatnya, truk-truk ini sering mengalami waktu henti yang mengganggu jadwal pengiriman. Tujuan penelitian ini yaitu merancang sebuah penjadwalan penggantian komponen di CV. Ragil Jaya Abadi. Penelitian ini menggunakan metode reliability centered maintenance. Hasil penelitian waktu interval perawatan beberapa komponen penting pada armada truk Nissan CKA-12 BTX di CV. Ragil Jaya Abadi antara lain komponen ban memerlukan penggantian setiap 16,501 km, oli setiap 6,881 km, dan untuk kopling setiap 20,614 km.
ABSTRACT
For companies operating in the distribution and logistics sector such as CV. Ragil Jaya Abadi, the existence of a truck fleet plays a very crucial role in supporting daily operational activities. A reliable truck fleet in optimal condition is the main key to ensuring smooth delivery of goods and maintaining customer satisfaction. However, the approach used is corrective, where repairs are only carried out after damage occurs. As a result, these trucks often experience downtime that disrupts the delivery schedule. The purpose of this study is to design a component replacement schedule at CV. Ragil Jaya Abadi. This study uses the reliability centered maintenance method. The results of the study of the maintenance interval of several important components on the Nissan CKA-12 BTX truck fleet at CV. Ragil Jaya Abadi. Tire components require replacement every 16,501 km. Oil every 6,881 km, and for the clutch every 20,614 km.
References
Akbar, M. R., & Widiasih, W. (2022). Analisis Perawatan Mesin Bubut dengan Metode Preventive Maintenance Guna Menghindari Kerusakan Secara Mendadak dan Untuk Menghitung Biaya Perawatan. Jurnal SENOPATI : Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 4(1), 32–45. https://doi.org/10.31284/j.senopati.2022.v4i1.3086
Ayuni, R. P., & Supriyadi, E. (2023). Systematic Literature Review: Pemeliharaan Mesin Dengan Metode Reliability Centered Maintenance (Rcm) Di Perseroan Terbatas. Sistemik : Jurnal Ilmiah Nasional Bidang Ilmu Teknik, 11(1), 1–7. https://doi.org/10.53580/sistemik.v11i1.80
Febryan, C., Luh, N., Lilis, P., Setiawati, S., Teknik, F., & Udayana, U. (2024). Implementasi Perbaikan UI/UX Ju Spanduk Iklan pada Video Player dengan Metodologi AGILE di PT X. Jurnal Taguchi. 31–41. https://doi.org/10.46306/tgc.v4i1.153
Ignatius Deradjad Pranowo, M. E. (2019). Sistem dan Manajemen Pemeliharaan (Maintenance : System and Management). CV BUDI UTAMA.
Irdiansyah, L., & Ludiya, E. (2022). Pemeliharaan Korektif Mesin Cetak Offset 4 Warna Pada Cv. Aries Anugrah Karya Utama. Jurnal Administrasi Bisnis, 18(1), 1–16. https://doi.org/10.26593/jab.v18i1.5535.1-16.
Mutaqiem, A., Soediantono, D., & Staf Dan Komando Angkatan Laut, S. (2022). Literature Review of Total Productive Maintenance (TPM) and Recommendations for Application in the Defense Industries. Journal of Industrial Engineering & Management Research, 3(2), 2722–8878. http://www.jiemar.org
Simanungkalit, R. M., Suliawati, S., & Hernawati, T. (2023). Analisis Penerapan Sistem Perawatan dengan Menggunakan Metode Reliability Centered Maintenance (RCM) pada Cement Mill Type Tube Mill di PT Cemindo Gemilang Medan. Blend Sains Jurnal Teknik, 2(1), 72–83. https://doi.org/10.56211/blendsains.v2i1.199
Sitinjak, F. R., & Silalahi, F. T. R. (2023). Analisis Strategi Pemeliharaan Preventive Maintenance Excavator Menggunakan Pendekatan Analytical Hierarchy Process (AHP) dan Analisis Sensitivitas. Journal of Integrated System, 6(2), 226–242. https://doi.org/10.28932/jis.v6i2.7633
Theresia, L., Ranti, G., & Widianty, Y. (2023). Implementasi Lean Reliability Centered Maintenance (RCM) untuk Meningkatkan Keandalan Mesin: Studi Kasus PT Pelita Cengkareng Paper. Jurnal IPTEK, 7(2), 13–20.
Zendrato, R. V., Ryantama, R., Nugroho, M. A., Putri, D., Kuncoro, D., & Parningotan, S. (2022). Analisis Pengendalian Kualitas Pada Tempe Menggunakan Metode Seven Tools. IMTechno: Journal of Industrial Management and Technology, 3(2), 99–109. https://doi.org/10.31294/imtechno.v3i2.1221.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 JISO : Journal of Industrial and Systems Optimization
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
With the receipt of the article by JISO Editorial Board and the decision to be published, the copyright regarding the article will be transferred to JISO. The copyright transfer form can be downloaded here.
JISO has the right to multiply and distribute the article and every author is not allowed to publish the same article that was published in this journal.
JISO is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
